Custom Copper
Transitional Rustic Smooth Copper Range Hood with Straps
Transitional Rustic Smooth Copper Range Hood with Straps
Couldn't load pickup availability
Share
The Transitional Rustic Smooth Copper Range Hood with Straps is a custom copper kitchen hood handcrafted from solid copper with a smooth, lightly hammered surface, tapered pyramid body, soft concave flares, horizontal straps, copper rivets, and a wide reinforced apron. Select widths of 30, 36, 48, or 60 inches and heights of 24, 36, 48, or 60 inches, plus natural or coffee patina and wall-mount or kitchen-island construction. Its balanced profile provides architectural warmth while allowing preparation for compatible ventilation equipment. Explore additional planning information in the transitional copper hood guide. Configure this handcrafted copper range hood for your kitchen project.
Product Summary
- Material: smooth solid copper
- Sizes: 30–60"W; 24–60"H
- Patina: natural or coffee
- Mounting: wall or island
- Insert: economy 200 CFM
Transitional Rustic Profile
The tapered pyramid body narrows toward the rectangular chimney and widens above the cooking surface. Soft concave flares reduce the visual weight of the broad lower section, producing a balanced profile that feels substantial without appearing excessively ornate or heavy within the surrounding kitchen.
Smooth Copper Surface
The smooth, minimally hammered surface allows light to move gently across the copper panels. Instead of emphasizing deep texture, the restrained finish highlights the hood’s patina, panel geometry, seams, straps, rivets, and gradual tonal variation developed through the handcrafted finishing process.
Horizontal Copper Straps
Horizontal straps divide the chimney and reinforce the wide apron, adding structure without covering the clean copper body. Their placement creates visual rhythm across the upper and lower sections while supporting the transitional balance between refined geometry and traditional artisan metalwork.
Riveted Apron Detail
The lower apron forms a strong architectural base above the range. Copper rivets accent the horizontal straps and draw attention to the handmade assembly, giving the hood rustic character while maintaining a cleaner appearance than heavily ornamented strap, molding, or relief designs.
Handcrafted Copper Construction
Each hood is individually formed, joined, strapped, riveted, and finished by experienced metalworkers rather than stamped as a uniform appliance shell. Made-to-order construction allows the exterior dimensions, mounting configuration, chimney proportions, apron, and interior ventilation preparation to follow the confirmed project requirements.
Design Features and Planning
The table connects the hood’s principal visual features with the installation decisions they affect. Review the copper shell, mounting structure, ventilation equipment, service access, and surrounding materials together so the finished hood functions as one coordinated kitchen element.
| Feature | Design Effect | Planning Focus |
|---|---|---|
| Tapered body | Adds vertical structure | Range and ceiling size |
| Concave flares | Softens the profile | Cabinet spacing |
| Chimney strap | Divides the upper body | Vertical proportion |
| Apron straps | Strengthen the base | Insert access |
| Copper rivets | Add artisan detail | Visual alignment |
| Wall mounting | Frames the backsplash | Rear support |
| Island mounting | Creates a central focus | Ceiling support |
Copper Hood Dimensions
Choose the hood size according to the cooking-surface width, ceiling height, installation clearance, cabinet spacing, finished depth, chimney route, and ventilation equipment. Wider models create greater visual presence and cooking coverage, but every dimension must remain compatible with the mounting structure and service area.
Natural or Coffee Patina
Natural patina emphasizes copper, amber, and reddish-brown tones, while coffee patina creates a deeper brown appearance with stronger contrast around straps, rivets, seams, and panel edges. Compare both options with cabinetry, countertops, backsplashes, flooring, lighting temperature, and nearby metal finishes.
Wall or Island Construction
Wall-mount construction coordinates with a backsplash, rear framing, surrounding cabinetry, and a wall or roof duct route. Island construction is finished for viewing from multiple directions and requires suitable ceiling framing, accurate centering, chimney alignment, planned duct placement, and accessible ventilation service points.
Kitchen Design Applications
The transitional rustic profile coordinates with natural stone, plaster, terracotta, decorative tile, wood cabinetry, exposed beams, iron lighting, and aged hardware. Its smooth copper surface and restrained straps also work with transitional kitchens featuring Shaker cabinets, simpler countertops, and clean architectural lines.
Strap and Cabinet Coordination
The horizontal straps can visually connect with cabinet rails, drawer lines, shelving, backsplash courses, and other linear details. Their darker shadows provide contrast against the smooth copper body, helping the hood relate to surrounding architectural elements without requiring additional decorative molding or applied ornament.
Ventilation and Insert Options
The standard hood includes an economy 200 CFM insert. Stronger inserts are not sold because each kitchen requires specific ventilation equipment. The shell can be prepared for a buyer-supplied internal insert up to 1200 CFM or an external system up to 1500 CFM, with compatible interior preparation included.
Insert Compatibility Requirements
Provide the manufacturer, model, specification sheet, overall dimensions, cutout dimensions, duct diameter, controls, lighting, filter access, electrical access, and service clearances. As a general guideline, the insert should be about six inches smaller than the hood in both width and depth, subject to technical review.
Insert Service Access
The selected equipment must allow practical access to filters, controls, lights, electrical connections, fasteners, and removable components. Confirm how the insert is installed, maintained, and removed before approving the interior preparation because limited access can complicate cleaning, repair, and future equipment replacement.
Ductwork and Airflow
Actual airflow depends on the insert, blower location, duct diameter, duct length, elbows, termination, filters, makeup-air requirements, and installation quality. A ventilation professional should verify that the proposed system satisfies the cooking equipment, building conditions, manufacturer instructions, and applicable local requirements.
Measurements Before Production
Confirm the range width, hood width, hood height, finished depth, mounting configuration, ceiling height, installation clearance, cabinet spacing, backsplash thickness, chimney route, duct centerline, and nearby architectural features. Insert dimensions, control access, filter removal, electrical connections, and service clearances must also be verified.
Product Specifications
- Product: strapped copper hood
- Material: handcrafted copper
- Surface: smooth light texture
- Profile: tapered pyramid
- Flares: soft concave form
- Chimney: rectangular body
- Detail: horizontal straps
- Fasteners: copper rivets
- Widths: 30, 36, 48, or 60"
- Heights: 24, 36, 48, or 60"
- Patinas: natural or coffee
- Mounting: wall or island
- Included insert: 200 CFM
- Internal system: up to 1200 CFM
- External system: up to 1500 CFM
- Insert preparation: included
- Ductwork: installer planned
- Production: made to order
Ordering and Customization
- Select: wall or island construction
- Choose: natural or coffee patina
- Set: the required hood width
- Set: the required hood height
- Confirm: the finished hood depth
- Choose: the 200 CFM insert
- Provide: your insert specifications
- Verify: duct and chimney placement
- Review: every project measurement
Items Included and Excluded
The listed configuration includes the handcrafted copper shell and a compatible 200 CFM insert unless buyer-supplied equipment is approved. Installation labor, structural framing, ductwork, electrical connections, penetrations, makeup-air systems, site modifications, and professional services are excluded unless specifically confirmed in the order.
Professional Installation
Qualified professionals should install the hood using structural support appropriate for the copper shell, ventilation equipment, and site conditions. The installer is responsible for framing, mounting, ductwork, electrical service, clearances, service access, termination, and compliance with equipment instructions and local requirements.
Frequently Asked Questions
Which size combinations are available for this strapped copper hood?
Choose 30, 36, 48, or 60-inch widths with 24, 36, 48, or 60-inch heights.
How does the island version differ from the wall-mount version?
The wall version uses rear support, while the island version requires finished sides and suitable ceiling framing.
How do natural and coffee patinas affect the copper straps?
Natural patina keeps warmer tones, while coffee patina creates deeper contrast around straps, rivets, seams, and panel edges.
Is the surface smooth or deeply hand hammered?
The surface is smooth and lightly textured, allowing the patina, straps, and tapered geometry to remain prominent.
Which ventilation systems can this hood accommodate?
It includes a 200 CFM insert and supports approved internal systems to 1200 CFM or external systems to 1500 CFM.
What information is required for my buyer-supplied insert?
Submit the complete specification sheet and allow about six inches in width and depth when possible.
Customize Copper Hood
Confirm the dimensions, patina, mounting configuration, ventilation equipment, duct route, and installation conditions before production. Order the Transitional Rustic Smooth Copper Range Hood with Straps after every project specification has been reviewed.
Related Resources
Copper Care and Maintenance
Clean the copper with warm water, mild soap, and a soft cloth, then dry it carefully. Avoid acids, ammonia, abrasive pads, metal polish, and harsh degreasers. Maintain filters and accessible interior components according to the ventilation insert manufacturer’s instructions.
Shipping and Returns
Average delivery is about four weeks. Unused items may be returned within 30 days; review the shipping policy and refund policy.
Warranty
Manufacturing concerns are reviewed individually with order details and photos. Buyer-supplied inserts and installation are excluded; review the contact information.
Disclaimer: Handmade patina, texture, straps, rivets, and dimensions may vary. Lifestyle images are for inspiration only. Product images are copyright protected.
